Background

The MRTSampleSizeBinary package provides a sample size calculator for micro-randomized trials (MRT) where the proximal outcomes are binary. This calculator can be used to either

determine the sample size needed to ensure a specified power when testing for a nonzero marginal causal excursion effect, or
determine the power given a sample size when testing for a nonzero marginal causal excursion effect.

MRT is an experimental design for optimizing mobile health interventions such as push notifications to increase physical activity. The calculator is based on the methods developed by Cohn et al. (2021). For a general overview of MRT, see Klasnja et al. (2015) and Liao et al. (2016). Here we briefly review the hypothesis test that the sample size is calculated for.

Let \((X_1, A_1, Y_2, X_2, A_2, Y_3, \ldots, X_m, A_m, Y_{m+1})\) denote the observed data from a participant in the MRT, where \(m\) denotes the total number of decision points, and for each decision point \(t\):

\(X_t\) denotes the time-varying covariate.
\(A_t\) denotes the treatment assignment. We assume \(A_t\) takes value in \(\{0, 1\}\): For example, if the treatment is a push notification, then \(A_t = 0\) means the push notification is not delivered at \(t\), and \(A_t = 1\) means the push notification is delivered at \(t\).
\(Y_{t+1}\) denotes the binary proximal outcome.
\(I_t\) denote the availability condition at \(t\): \(I_t = 1\) if the participant is available for treatment at \(t\), and \(I_t = 0\) if the participant is unavailable at \(t\). With our notation \(I_t\) is included in \(X_t\).

For primary analysis of an MRT, one is usually interested in testing for a marginal causal excursion effect (MEE); see Cohn et al. (2021) and Qian et al. (2020) for details. Under standard causal assumptions, MEE at decision point \(t\) can be expressed as \[ \text{MEE}(t) = \log \frac{P(Y_{t+1} = 1 \mid A_t = 1, I_t = 1)}{P(Y_{t+1} = 1 \mid A_t = 0, I_t = 1)}, \] which is akin to a relative risk. We consider testing the following null hypothesis \[ H_0: \text{MEE}(t) = 0 \text{ for all } 1\leq t \leq m \] against the alternative hypothesis \[ H_1: \text{MEE}(t) \neq 0 \text{ for some } 1\leq t \leq m. \]

The sample size is calculated to ensure adequate power to detect a particular target alternative \[ H_1^{\text{target}}: \text{MEE}(t) = f(t)^T \beta \text{ for all } 1\leq t \leq m, \] where \(f(t)\) is a user-specified \(p\)-dimensional vector-valued function of \(t\) and \(\beta \in \mathbb{R}^p\). For example, if the user conjectures that a likely alternative is a constant treatment effect, they can set \(f(t) = 1\) and \(\beta\) will be a scalar; if the user conjectures that the treatment effect would decrease over time, they can set \(f(t) = (1, t)^T\) and \(\beta\) will be a vector of length 2. The user will supply \(f(t)\) and \(\beta\), along with other inputs that will be detailed below, when using the calculator in this package.

Quick Start

The function to calculate the sample size is mrt_binary_ss(). The function to calculate the sample size is mrt_binary_power(). Because the syntax for their use are similar, here we illustrate the use of mrt_binary_ss().

The function mrt_binary_ss() takes in the following arguments:

avail_pattern: A vector of length \(m\). The \(t\)-th entry denotes the average availability at decision point \(t\), \(E(I_t)\).
p_t: A vector of length \(m\). The \(t\)-th entry denotes the randomization probability at decision point \(t\), \(P(A_t = 1)\).
f_t and beta: They characterize the MEE under the target alternative \(H_1^{\text{target}}\), where f_t is a matrix of size \(m \times p\), and beta is a vector of length \(p\), and \(p\) is the degrees of freedom for the MEE under alternative. Specifically, under \(H_1^{\text{target}}\), \(\text{MEE}(t)\) equals f_t[t, ] %*% beta for each \(1 \leq t \leq m\). Usually the first column of f_t is a column of 1’s.
g_t and alpha: They characterize the success probability null curve \(E(Y_{t+1} \mid A_t = 0, I_t = 1)\) for \(1 \leq t \leq m\), where g_t is a matrix of size \(m \times q\) and alpha is a vector of length \(q\), and \(q\) is the degrees of freedom for the success probability null curve. Specifically, \(E(Y_{t+1} \mid A_t = 0, I_t = 1)\) equals g_t[t, ] %*% alpha for each \(1 \leq t \leq m\). Usually the first column of g_t is a column of 1’s. In addition, it is required that the linear column span of g_t contains f_t[, j] * p_t for each \(1 \leq j \leq p\) for the sample size calculation result to be accurate; mrt_binary_ss() checks for this and if not satisfied the function will output a warning.
gamma: A scalar. This is the desired type I error.
b: A scalar. This is the desired type II error. In other words, \(1-b\) is the desired power.
exact: A boolean value, default to FALSE. If TRUE, outputs the resulting sample size with decimal digits. If FALSE, outputs the resulting sample size after talking the ceiling (smallest integer that is larger than or equal to the calculated sample size).

A numerical example

We use the following numerical example to illustrate 4 functions in this package: mrt_binary_ss(), mrt_binary_power(), power_vs_n_plot(), and power_summary(). In this numerical example, the total number of decision points \(m = 10\). The degrees of freedom for the MEE and the success probability null curve are \(p = 2\) and \(q = 2\).

library(MRTSampleSizeBinary)

tau_t_1: Vector of length 10 that holds the average availability at each time point. In this example the availability remains constant across decision points.

tau_t_1
#>  [1] 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

p_t_1: A length 10 vector of randomization probabilities for each time point. This example has the randomization probability staying constant across decision points.

p_t_1
#>  [1] 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

f_t_1: A 10 by 2 matrix that defines the MEE under the target alternative hypothesis (together with beta_1). Each row corresponds to a decision point (in this example we have 10).

f_t_1
#>       [,1] [,2]
#>  [1,]    1    1
#>  [2,]    1    2
#>  [3,]    1    3
#>  [4,]    1    4
#>  [5,]    1    5
#>  [6,]    1    6
#>  [7,]    1    7
#>  [8,]    1    8
#>  [9,]    1    9
#> [10,]    1   10

beta_1: Vector that defines the MEE under the target alternative hypothesis (together with f_t_1).

beta_1
#> [1]  0.15 -0.01

g_t_1: A 10 by 2 matrix that defines the success probability null curve (together with alpha_1). As with f_t_1, each row corresponds to a decision point.

g_t_1
#>       [,1] [,2]
#>  [1,]    1    1
#>  [2,]    1    2
#>  [3,]    1    3
#>  [4,]    1    4
#>  [5,]    1    5
#>  [6,]    1    6
#>  [7,]    1    7
#>  [8,]    1    8
#>  [9,]    1    9
#> [10,]    1   10

alpha_1: A length of 2 vector that defines the success probability null curve (together with g_t_1).

alpha_1
#> [1] -0.2 -0.1

Example use of `mrt_binary_ss()`

Below we compute the required sample size for an MRT to achieve \(0.8\) power using the above numerical example. Recall that the argument gamma is the type I error rate, b is the type II error rate (\(1- \text{power}\)), and exact is a flag for if the function should return the exact sample size our calculator computes (this may not be an integer) or the ceiling of this number. By default exact=FALSE. We see that the required sample size is \(275\) individuals for this numerical example.

mrt_binary_ss(avail_pattern=tau_t_1, 
                               f_t=f_t_1, g_t=g_t_1, 
                               beta=beta_1, alpha=alpha_1,
                               p_t=p_t_1, 
                               gamma=0.05, 
                               b=.2,
                               exact=FALSE)
#> [1] 275

Example use of `mrt_binary_power()`

If the investigator would like to calculate power given a sample size and a specified significance level, then they can use the mrt_binary_power() function. The first seven arguments are the same as in mrt_binary_ss(). The final argument, n is the sample size (i.e., number of individuals). Notice that, as expected, the sample size (n=275) is the output from the previous computation and the power is very close to \(0.8\); it is not exactly 0.8 due to the rounding up of the sample size in the previous example.

mrt_binary_power(avail_pattern=tau_t_1, 
                          f_t=f_t_1, g_t=g_t_1, 
                          beta=beta_1, alpha=alpha_1, 
                          p_t=p_t_1, 
                          gamma=0.05, 
                          n=275)
#> [1] 0.8015381

Example use of `power_vs_n_plot()`

power_vs_n_plot() can be used to obtain a visualization of the relationship between the power and the sample size for a range of possible power and sample size values. The following example uses the default range of sample sizes to plot over, but with the additional arguments min_n and max_n the user can choose what sample size range they want to plot over.

power_vs_n_plot(avail_pattern=tau_t_1, 
                f_t=f_t_1, g_t=g_t_1, 
                beta=beta_1, alpha=alpha_1, 
                p_t=p_t_1, 
                gamma=0.05)

Example use of `power_summary()`

power_summary() provides a tabular way to examine the relationship between the power and the sample size. The following example presents the sample size for power ranging from \(0.6\) to \(0.95\) by increments of \(0.05\). Again, we see that a sample size of \(275\) will achieve a power of \(0.8\) in our numerical example. The user can customize the power range and increments by specifying the power_levels argument.

power_summary(tau_t_1, f_t_1, g_t_1,beta_1, alpha_1, p_t_1, 0.05)
#>      power sample_size
#> [1,]  0.60         178
#> [2,]  0.65         198
#> [3,]  0.70         220
#> [4,]  0.75         245
#> [5,]  0.80         275
#> [6,]  0.85         311
#> [7,]  0.90         359
#> [8,]  0.95         438

Sample Size Calculator for Micro-Randomized Trials with Binary Outcomes

Eliot Wong-Toi, Thabat Dahdoul, Tianchen Qian

Background

Quick Start

A numerical example

Example use of `mrt_binary_ss()`

Example use of `mrt_binary_power()`

Example use of `power_vs_n_plot()`

Example use of `power_summary()`

References

Sample Size Calculator for Micro-Randomized Trials with Binary Outcomes

Eliot Wong-Toi, Thabat Dahdoul, Tianchen Qian

Background

Quick Start

A numerical example

Example use of mrt_binary_ss()

Example use of mrt_binary_power()

Example use of power_vs_n_plot()

Example use of power_summary()

References

Example use of `mrt_binary_ss()`

Example use of `mrt_binary_power()`

Example use of `power_vs_n_plot()`

Example use of `power_summary()`