RRphylo

Silvia Castiglione, Carmela Serio, Pasquale Raia

Index

  1. RRphylo basics
    1. RRphylo phylogenetic ridge regression
  2. Accounting for the effect of a covariate
  3. Multiple regression framework
  4. Setting values at internal nodes
  5. Guided examples

RRphylo Basics

RRphylo is a full-fledged phylogenetic comparative method, based on RidgeRace regression (Kratsch and McHardy, 2014). It provides the rate of phenotypic change per branch and the vector of phenotypic estimates at nodes, with either continuous or discrete, univariate or multivariate data (Castiglione et al. 2018, 2020a). As compared to classic, model-based approaches, RRphylo makes no a priori assumption about the tempo and mode of phenotypic evolution. However, rates are presumed to change more between than within clades (see below) and the rate of change is calculated as proportional to time (branch lengths).

RRphylo phylogenetic ridge regression

The RRphylo method is based on RidgeRace regression from Kratsch and McHardy (2014). Under both methods, the phenotypic change between a node and a daughter tip along a phyletic line is described by the sum of individual contributions at each consecutive branch according to the equation: \[Δy = β_{1}*l_{1} + β_{2}*l_{2} + ... β_{n}*l_{n}\] where \(n\) equals the number of branches intervening between the node and the tip, \(β_{1...n}\) are the vectors of regression coefficients (the evolutionary rates) at each branch, and \(l_{1...n}\) are the branch lengths. Extending this calculation simultaneously for the entire phylogeny, the \(\hat{β}\) vector is calculated as:

betas <- (solve(t(L) %*% L + lambda * diag(ncol(L))) %*% t(L)) %*% as.matrix(y)

and the vector of predicted phenotypes at tips and nodes, respectively:

y.pred <- L %*% betas
ace <- L1 %*% betas[1:Nnode(tree),]

Where L and L1 are matrices of root to tip distances and λ is a penalization factor.

L is a \(n*m\) matrix, where n = number of tips and m = number of branches (i.e. number of tips + number of nodes). Each row represents the branch lengths aligned along a root-to-tip path.

L1 is a \(m*m\) matrix, where m = number of internal branches (i.e. number of nodes). Each row represents the branch lengths aligned along a root-to-node path.

require(ape)
set.seed(76)
rtree(5)->tree
makeL(tree)->L
makeL1(tree)->L1

plot(tree,no.margin=TRUE,edge.width=1.7)
nodelabels(bg="w",frame="n",col="red",adj=-0.01)
L1 matrix
6 7 8 9
6 0.597 0.000 0.000 0.000
7 0.597 0.627 0.000 0.000
8 0.597 0.627 0.888 0.000
9 0.597 0.627 0.888 0.861
L matrix
6 7 8 9 t4 t2 t5 t3 t1
t4 0.597 0.000 0.000 0.000 0.322 0.000 0.000 0.000 0.000
t2 0.597 0.627 0.000 0.000 0.000 0.557 0.000 0.000 0.000
t5 0.597 0.627 0.888 0.000 0.000 0.000 0.943 0.000 0.000
t3 0.597 0.627 0.888 0.861 0.000 0.000 0.000 0.309 0.000
t1 0.597 0.627 0.888 0.861 0.000 0.000 0.000 0.000 0.568

The λ value penalizes the fit of predicted phenotypes by adding a penalty on large values of \(β\) as to avoid overparameterization and multicollinearity. In fact, when λ is close to 0, the \(\hat{β}\) vector is calculated as to compute the phenotypic vector perfectly:

require(phytools)

rtree(100)->tree
makeL(tree)->L

# produce a phenotypic vector for both tips and nodes
fastBM(tree,internal=T)->phen
phen[1:100]->y
phen[101:199]->acey

# set λ close to 0
lambda <-1e-10

# compute evolutionary rates and estimate phenotypic values at tips as within RRphylo
betas<-(solve(t(L) %*% L +  lambda *diag(ncol(L))) %*% t(L)) %*% as.matrix(y)
y.pred <- L %*% betas

plot(y,y.pred,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="simulated",ylab="estimated",main="phenotype at tips")

Yet, such perfect fitting corresponds to a phylogeny with many phenotypic rates at zero and only few branches with rates of high absolute values, describing a rather implausible model for phenotypic evolution. Also, it makes it impossible to estimate the ancestral character values (aces) at internal nodes.

par(mfrow=c(1,2),mar=c(4,3,3,1))

plot(c(acey,y),betas,bg=c(rep("red",99),rep("green",100)),pch=21,cex=1.5,mgp=c(1.8,0.5,0),
     xlab="phenotypes at nodes and tips",ylab="rates",main="rates vs simulated phenotypes")
legend("topright",legend=c("nodes","tips"),fill=c("red","green"),bty="n")

# compute ancestral character estimates at nodes as within RRphylo
makeL1(tree)->L1
ace <- L1 %*% betas[1:Nnode(tree),]
plot(acey,ace,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="simulated",ylab="estimated",main="phenotype at nodes (aces)")

In Kratsch and McHardy (2014), λ is estimated through L2 (quadratic) penalization. Within RRphylo (Castiglione et al. 2018), λ is fitted by an inner function optL, which is written as to minimize the rate variation within clades, thereby acting conservatively in terms of the chance to find rate shifts and introducing phylogenetic autocorrelation in evolutionary rates (Sakamoto & Venditti, Eastmann et al. 2011) .

RRphylo(tree,y)->RR
RR$rates[,1]->betas
RR$predicted.phenotype[,1]->y.pred
RR$aces[,1]->ace

par(mfrow=c(1,2),mar=c(4,3,3,1))
plot(y,y.pred,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="simulated",ylab="estimated by RRphylo",main="phenotype at tips")
plot(acey,ace,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="simulated",ylab="estimated by RRphylo",main="phenotype at nodes (aces)")

In the case of multivariate data, λ values are calculated independently for each variable. A multivariate rate vector is calculated as the L2-norm of the individual rates computed for each branch.

Accounting for the effect of a covariate

Since rates are in fact phylogenetic ridge regression coefficients, their magnitude depends on the absolute values of the phenotypes being regressed (Castiglione et al. 2018), that means large phenotypic values will originate large rates even with small phenotypic change. To standardize the rates, in RRphylo it is advisable to use the phenotype itself as a covariate. In this case, the (logged) absolute rates are regressed against the absolute covariate values. The residuals of such regression are used in the place of the original rate values. Since rates are computed for each branch of the tree (i.e. are associated to both nodes and tips), the covariate must be as long as the number of nodes plus the number of tips. This is accomplished by performing RRphylo on the covariate itself, deriving phenotypic estimates at nodes, and collating them to the values at tips. The final vector is fed into RRphylo as cov argument. Whether or not to standardize rates depends on the research question being asked.

set.seed(76)
rtree(100)->tree
fastBM(tree,sig2=2)->y

# perform RRphylo on the covariate to retrieve ancestral character values 
# and collate them to tip values to create the covariate vector
RRphylo(tree,y)->RR
RR$rates[,1]->betas
c(RR$aces[,1],y)->cov

# within RRphylo the logged absolute rates are regressed against 
# the absolute covariate values, and regression residuals are used 
# as rate values
R <- log(abs(betas))
Y <- abs(cov)
res <- residuals(lm(R ~ Y))
betas <- as.matrix(res)

par(mfrow=c(1,2),mar=c(4,3,3,1))
plot(Y,R,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="absolute covariate values",ylab="log absolute rates")
abline(lm(R~Y),lwd=2,col="red")
plot(Y,res,pch=21,bg="gray80",cex=1.5,mgp=c(1.8,0.5,0),
     xlab="absolute covariate values",ylab="regression residuals")
abline(lm(res~Y),lwd=2,col="red")

Multiple regression framework

The multiple regression version of RRphylo is meant to evaluate the combined effect of phylogeny (basic predictor within RRphylo) and one to multiple additional predictors, either continuous or discrete (Castiglione et al. 2020a), on the evolution of a given phenotypic trait. Such additional predictor/s is/are included into the phylogenetic ridge regression equation as supplemental column/s within the L and L1 matrices. To associate predictor values to the L1 matrix (i.e. matrix of root-to-node paths), predictor values at nodes must be reconstructed. This is accomplished by performing RRphylo on the individual predictor/s, deriving their phenotypic estimates at nodes, and collating them to the values at tips. The final vector/matrix is fed into the RRphylo as the x1 argument.

L1’ matrix
6 7 8 9 pred
6 0.597 0.000 0.000 0.000 -0.318
7 0.597 0.627 0.000 0.000 -0.507
8 0.597 0.627 0.888 0.000 -1.056
9 0.597 0.627 0.888 0.861 -1.687
L’ matrix
6 7 8 9 t4 t2 t5 t3 t1 pred
t4 0.597 0.000 0.000 0.000 0.322 0.000 0.000 0.000 0.000 -0.255
t2 0.597 0.627 0.000 0.000 0.000 0.557 0.000 0.000 0.000 -0.417
t5 0.597 0.627 0.888 0.000 0.000 0.000 0.943 0.000 0.000 -0.902
t3 0.597 0.627 0.888 0.861 0.000 0.000 0.000 0.309 0.000 -1.629
t1 0.597 0.627 0.888 0.861 0.000 0.000 0.000 0.000 0.568 -2.174

This way, the vector \(\hat{β}\) of rates is calculated for all the branches in the tree and the last element of \(\hat{β}\) represents the partial phylogenetic ridge regression coefficient of the additional predictor, whereas the estimation of ancestral states remains unaffected.

The multiple regression version of RRphylo is useful when a trait or ecological factor (i.e. the predictor) is presumed to influence the response variable and hence its evolutionary rates. One example is the effect of body size on brain size (Serio et al. 2019, Melchionna et al. 2020, see example below).

Setting values at internal nodes

There is widespread acknowledgement that the inclusion of fossil information in analyses of phenotypic and taxonomic diversification increases both the power and reliability of inference about the tempo and mode of evolution. RRphylo allows to integrate the phenotypic information at internal nodes in the estimation of evolutionary rates and ancestral character states (Castiglione et al. 2020b).

Given a vector (or matrix in case of multivariate data) of \(n\) known phenotypic values to be placed at internal nodes (aces argument within the function), a vector of false tips \(ftips\) of length \(n\) is added to the tree. Each \(i_{th}\) element of \(ftips\) is phenotypically identical to the corresponding \(aces_{i}\) and is attached to the tree at the position of \(aces_{i}\) with a branch of length = 0. Then, the vector \(\hat{β}\) of regression coefficients is estimated by means of RRphylo by using the modified tree and phenotype (which include both \(ftips\) and the real tips). Since the branch lengths of \(ftips\) are equal to zero, the phenotypic rate between each \(ftips_{i}\) and the corresponding node is zero, which means the \(aces\) and their corresponding \(ftips\) will have the same phenotypic estimates. After \(β\) coefficients are estimated, the vector of phenotypic values at nodes is calculated as usual as L1 %*% betas[1:Nnode(tree),]. The final step of the algorithm consists in removing \(ftips\) from the tree, and from the rate and phenotypic vectors.

Guided examples

# load the RRphylo example dataset including Cetaceans tree and data
data("DataCetaceans")
DataCetaceans$treecet->treecet # phylogenetic tree
DataCetaceans$masscet->masscet # logged body mass data
DataCetaceans$brainmasscet->brainmasscet # logged brain mass data
DataCetaceans$aceMyst->aceMyst # known phenotypic value for the most recent 
                               # common ancestor of Mysticeti

par(mar=c(0,0,0,1))
plot(ladderize(treecet,FALSE),show.tip.label = FALSE,edge.color = "gray40",edge.width = 1.5)
plotinfo<-get("last_plot.phylo",envir =ape::.PlotPhyloEnv)
nodelabels(text="",node=128,frame="circle",bg="red",cex=0.5)
nodelabels(text="Mystacodon",node=128,frame="n",bg="w",cex=1,adj=c(-0.1,0.5),font=2)
range(plotinfo$yy[which(treecet$tip.label%in%tips(treecet,128))])->yran128
rect(plotinfo$x.lim[2]+0.4,yran128[1],plotinfo$x.lim[2]+0.7,yran128[2],col="red",border="red")
range(plotinfo$yy[which(treecet$tip.label%in%tips(treecet,142))])->yran142
rect(plotinfo$x.lim[2]+0.4,yran142[1],plotinfo$x.lim[2]+0.7,yran142[2],col="blue",border="blue")
mtext(c("Mysticeti","Odontoceti"), side = 4,line=-0.5,at=c(sum(yran128)/2,sum(yran142)/2),
      cex=1.5,adj=0.5,col=c("red","blue"))

# check the order of your data: best if data vectors
# are sorted in the same order of the species on the phylogeny
masscet[match(treecet$tip.label,names(masscet))]->masscet


## Example 1: RRphylo by accounting for the effect of a coviariate
# perform RRphylo on the vector of (log) body mass
RRphylo(tree=treecet,y=masscet)->RRmasscet 

# create the covariate vector: extract phenotypic character (i.e. log body mass) 
# estimates at nodes from the RR object ($aces) and collate them 
# to the vector of (log) body mass 
c(RRmasscet$aces[,1],masscet)->masscov

# perform RRphylo on the vector of (log) body mass by including 
# the body mass itslef as covariate
RRphylo(tree=treecet,y=masscet,cov=masscov)->RRcov


## Example 2: RRphylo by setting values at internal nodes
# Set the body mass of Mysticetes ancestor (Mystacodon selenensis) 
# as known value at node
RRphylo(tree=treecet,y=masscet,aces=aceMyst)->RRace


## Example 3: multiple regression version of RRphylo
# cross-reference the phylogenetic tree and body and brain mass data. 
# Remove from both the tree and vector of body sizes the species 
# whose brain size is missing
drop.tip(treecet,treecet$tip.label[-match(names(brainmasscet),treecet$tip.label)])->treecet.multi
masscet[match(treecet.multi$tip.label,names(masscet))]->masscet.multi

# check the order of your data: best if
# data vectors (i.e. masscet and brainmasscet) are sorted
# in the same order of the species on the phylogeny
masscet.multi[match(treecet.multi$tip.label,names(masscet.multi))]->masscet.multi
brainmasscet[match(treecet.multi$tip.label,names(brainmasscet))]->brainmasscet

# perform RRphylo on tree and body mass data
RRphylo(tree=treecet.multi,y=masscet.multi)->RRmass.multi

# create the predictor vector: retrieve the ancestral character estimates 
# of body size at internal nodes from the RR object ($aces) and collate them
# to the vector of species' body sizes to create
c(RRmass.multi$aces[,1],masscet.multi)->x1.mass

# perform the multiple regression version of RRphylo by using
# the brain size as variable and the body size as predictor
RRphylo(treecet.multi,y=brainmasscet,x1=x1.mass)->RRmulti


## Example 4: categorical and multiple regression version of RRphylo with 
## 2 additional predictors performed by setting values at internal nodes
require(phytools)
set.seed(1458)

# generate a random tree and a BM phenotypic vector on it
rtree(50)->tree
fastBM(tree)->y

# produce two variables to be used as additional predictors into the multiple 
# regression version of  RRphylo. One variable is continuous, the other is discrete.
jitter(y)*10->y1
rep(1,length(y))->y2
y2[sample(1:50,20)]<-2
names(y2)<-names(y)

# perform RRphylo on y1 and y2 to retrieve ancestral state estimates at nodes
# and create the x1 matrix
c(RRphylo(tree,y1)$aces[,1],y1)->x1
RRphylo(tree,y2)->RRcat # this is categorical RRphylo
c(RRcat$aces[,1],y2)->x2
cbind(x1,x2)->x1mat

# create the phenotypes for y, y1, and y2 to be set as known values at internal nodes 
cbind(c(jitter(mean(y1[tips(tree,83)])),1),
     c(jitter(mean(y1[tips(tree,53)])),2))->acex
c(jitter(mean(y[tips(tree,83)])),jitter(mean(y[tips(tree,53)])))->acesy
names(acesy)<-rownames(acex)<-c(83,53)

# perform RRphylo by specifying aces, x1, and aces.x1 arguments
RRphylo(tree,y,aces=acesy,x1=x1mat,aces.x1 = acex)->RRcat.multi

References

Castiglione, S., Tesone, G., Piccolo, M., Melchionna, M., Mondanaro, A., Serio, C., Di Febbraro, M., & Raia, P.(2018). A new method for testing evolutionary rate variation and shifts in phenotypic evolution. Methods in Ecology and Evolution, 9, 974-983.

Castiglione, S., Serio, C., Piccolo, M., Mondanaro, A., Melchionna, M., Di Febbraro, M., Sansalone, G., Wroe, S.,& Raia, P. (2020a). The influence of domestication, insularity and sociality on the tempo and mode of brain size evolution in mammals. Biological Journal of the Linnean Society, 132, 221-231.

Castiglione, S., Serio, C., Mondanaro, A., Melchionna, M., Carotenuto, F., Di Febbraro, M., Profico, A., Tamagnini, D., & Raia, P. (2020b). Ancestral State Estimation with Phylogenetic Ridge Regression. Evolutionary Biology, 47, 220-232.

Eastman, J.M., Alfaro, M.E., Joyce, P., Hipp, A.L., & Harmon, L.J. (2011) A novel comparative method for identifying shifts in the rate of character evolution on trees. Evolution 65, 3578– 3589.

Kratsch C. & McHardy A.C. (2014). RidgeRace: ridge regression for continuous ancestral character estimation on phylogenetic trees. Bioinformatics, 30, i527–i533.

Melchionna, M., Mondanaro, A., Serio, C., Castiglione, S., Di Febbraro, M., Rook, L., Diniz-Filho, J.A.F., Manzi, G., Profico, A., Sansalone, G., & Raia, P. (2020). Macroevolutionary trends of brain mass in Primates. Biological Journal of the Linnean Society, 129, 14-25.

Sakamoto M. & Venditti C. (2018). Phylogenetic non-independence in rates of trait evolution. Biology Letters, 14, 20180502.

Serio, C., Castiglione, S., Tesone, G., Piccolo, M., Melchionna, M., Mondanaro, A., Di Febbraro, M., & Raia, P. (2019). Macroevolution of Toothed Whales Exceptional Relative Brain Size. Evolutionary Biology, 46, 332-342.