Date and time is collected in SDTM as character values using the extended ISO 8601 format. For example, "2019-10-9T13:42:00". It allows that some parts of the date or time are missing, e.g., "2019-10" if the day and the time is unknown.
The ADaM timing variables like ADTM (Analysis Datetime) or ADY (Analysis Relative Day) are numeric variables. They can be derived only if the date or datetime is complete. Therefore {admiral} provides imputation functions which fill in missing date or time parts according to certain imputation rules.
In {admiral} we use only two functions derive_vars_dt() and derive_vars_dtm() for date and datetime imputations respectively. In all other functions where dates can be passed as an argument, we expect full dates or datetimes (unless otherwise specified), so if any possibility of partials then these functions should be used as a first step to make the required imputation.
The examples of this vignette require the following packages.
library(admiral)
library(lubridate)
library(tibble)
library(dplyr)In {admiral} we don’t allow users to pick any single part of the date/time to impute, we only enable to impute up to a highest level, i.e. you couldn’t choose to say impute months, but not days.
The simplest imputation rule is to set the missing parts to a fixed value. For example
impute_dtc_dtm(
"2019-10",
highest_imputation = "M",
date_imputation = "01-01",
time_imputation = "00:00:00"
)
#> [1] "2019-10-01T00:00:00"Sometimes this does not work as it would result in invalid dates, e.g.,
impute_dtc_dtm(
"2019-02",
highest_imputation = "M",
date_imputation = "02-31",
time_imputation = "00:00:00"
)
#> [1] "2019-02-31T00:00:00"Therefore the keywords "first" or "last" can be specified to request that missing parts are replaced by the first or last possible value:
impute_dtc_dtm(
"2019-02",
highest_imputation = "M",
date_imputation = "last",
time_imputation = "00:00:00"
)
#> [1] "2019-02-28T00:00:00"For dates, there is the additional option to use keyword "mid" to impute missing day to 15 or missing day and month to 06-30, but note the different behaviour below depending on preserve argument for case when month only is missing:
dates <- c(
"2019-02",
"2019",
"2019---01"
)
impute_dtc_dtm(
dates,
highest_imputation = "M",
date_imputation = "mid",
time_imputation = "00:00:00",
preserve = FALSE
)
#> [1] "2019-02-15T00:00:00" "2019-06-30T00:00:00" "2019-06-30T00:00:00"
impute_dtc_dtm(
dates,
highest_imputation = "M",
date_imputation = "mid",
time_imputation = "00:00:00",
preserve = TRUE
)
#> [1] "2019-02-15T00:00:00" "2019-06-30T00:00:00" "2019-06-01T00:00:00"If you wanted to achieve a similar result by replacing any missing part of the date with a fixed value 06-15, this is also possible, but note the difference in days for cases when month is missing:
dates <- c(
"2019-02",
"2019",
"2019---01"
)
impute_dtc_dtm(
dates,
highest_imputation = "M",
date_imputation = "06-15",
time_imputation = "00:00:00"
)
#> [1] "2019-02-15T00:00:00" "2019-06-15T00:00:00" "2019-06-15T00:00:00"The imputation level, i.e., which components are imputed if they are missing, is controlled by the highest_imputation argument. All components up to the specified level are imputed.
dates <- c(
"2019-02-03T12:30:15",
"2019-02-03T12:30",
"2019-02-03",
"2019-02",
"2019"
)
# Do not impute
impute_dtc_dtm(
dates,
highest_imputation = "n"
)
#> [1] "2019-02-03T12:30:15" NA NA
#> [4] NA NA
# Impute seconds only
impute_dtc_dtm(
dates,
highest_imputation = "s"
)
#> [1] "2019-02-03T12:30:15" "2019-02-03T12:30:00" NA
#> [4] NA NA
# Impute time (hours, minutes, seconds) only
impute_dtc_dtm(
dates,
highest_imputation = "h"
)
#> [1] "2019-02-03T12:30:15" "2019-02-03T12:30:00" "2019-02-03T00:00:00"
#> [4] NA NA
# Impute days and time
impute_dtc_dtm(
dates,
highest_imputation = "D"
)
#> [1] "2019-02-03T12:30:15" "2019-02-03T12:30:00" "2019-02-03T00:00:00"
#> [4] "2019-02-01T00:00:00" NA
# Impute date (months and days) and time
impute_dtc_dtm(
dates,
highest_imputation = "M"
)
#> [1] "2019-02-03T12:30:15" "2019-02-03T12:30:00" "2019-02-03T00:00:00"
#> [4] "2019-02-01T00:00:00" "2019-01-01T00:00:00"For imputation of years (highest_imputation = "Y") see next section.
In some scenarios the imputed date should not be before or after certain dates. For example an imputed date after data cut off date or death date is not desirable. The {admiral} imputation functions provide the min_dates and max_dates argument to specify those dates. For example:
impute_dtc_dtm(
"2019-02",
highest_imputation = "M",
date_imputation = "last",
time_imputation = "last",
max_dates = list(ymd("2019-01-14"), ymd("2019-02-25"))
)
#> [1] "2019-02-25T23:59:59"It is ensured that the imputed date is not after any of the specified dates. Only dates which are in the range of possible dates of the dtc value are considered. The possible dates are defined by the missing parts of the dtc date, i.e., for “2019-02” the possible dates range from “2019-02-01” to “2019-02-28”. Thus “2019-01-14” is ignored. This ensures that the non-missing parts of the dtc date are not changed.
If the min_dates or max_dates argument is specified, it is also possible to impute completely missing dates. For date_imputation = "first" the min_dates argument must be specified and for date_imputation = "last" the max_dates argument. For other imputation rules imputing the year is not possible.
# Impute year to first
impute_dtc_dtm(
c("2019-02", NA),
highest_imputation = "Y",
min_dates = list(ymd("2019-01-14"), ymd("2019-02-25"))
)
#> [1] "2019-02-25T00:00:00" "2019-02-25T00:00:00"
# Impute year to last
impute_dtc_dtm(
c("2019-02", NA),
highest_imputation = "Y",
date_imputation = "last",
time_imputation = "last",
max_dates = list(ymd("2019-01-14"), ymd("2019-02-25"))
)
#> [1] "2019-02-25T23:59:59" "2019-01-14T23:59:59"ADaM requires that date or datetime variables for which imputation was used are accompanied by date and/or time imputation flag variables (*DTF and *TMF, e.g., ADTF and ATMF for ADTM). These variables indicate the highest level that was imputed, e.g., if minutes and seconds were imputed, the imputation flag is set to "M". The {admiral} functions which derive imputed variables are also adding the corresponding imputation flag variables.
Note: The {admiral} datetime imputation function provides the ignore_seconds_flag argument which can be set to TRUE in cases where seconds were never collected. This is due to the following from ADaM IG: For a given SDTM DTC variable, if only hours and minutes are ever collected, and seconds are imputed in *DTM as 00, then it is not necessary to set *TMF to "S".
{admiral} provides the following functions for imputation:
derive_vars_dt(): Adds a date variable and a date imputation flag variable (optional) based on a –DTC variable and imputation rules.derive_vars_dtm(): Adds a datetime variable, a date imputation flag variable, and a time imputation flag variable (both optional) based on a –DTC variable and imputation rules.impute_dtc_dtm(): Returns a complete ISO 8601 datetime or NA based on a partial ISO 8601 datetime and imputation rules.impute_dtc_dt(): Returns a complete ISO 8601 date (without time) or NA based on a partial ISO 8601 date(time) and imputation rules.convert_dtc_to_dt(): Returns a date if the input ISO 8601 date is complete. Otherwise, NA is returned.convert_dtc_to_dtm(): Returns a datetime if the input ISO 8601 date is complete (with missing time replaced by "00:00:00" as default). Otherwise, NA is returned.compute_dtf(): Returns the date imputation flag.compute_tmf(): Returns the time imputation flag.The derive_vars_dtm() function derives an imputed datetime variable and the corresponding date and time imputation flags. The imputed date variable can be derived by using the derive_vars_dtm_to_dt() function. It is not necessary and advisable to perform the imputation for the date variable if it was already done for the datetime variable. CDISC considers the datetime and the date variable as two representations of the same date. Thus the imputation must be the same and the imputation flags are valid for both the datetime and the date variable.
ae <- tribble(
~AESTDTC,
"2019-08-09T12:34:56",
"2019-04-12",
"2010-09",
NA_character_
) %>%
derive_vars_dtm(
dtc = AESTDTC,
new_vars_prefix = "AST",
highest_imputation = "M",
date_imputation = "first",
time_imputation = "first"
) %>%
derive_vars_dtm_to_dt(vars(ASTDTM))| AESTDTC | ASTDTM | ASTDTF | ASTTMF | ASTDT |
|---|---|---|---|---|
| 2019-08-09T12:34:56 | 2019-08-09 12:34:56 | NA | NA | 2019-08-09 |
| 2019-04-12 | 2019-04-12 00:00:00 | NA | H | 2019-04-12 |
| 2010-09 | 2010-09-01 00:00:00 | D | H | 2010-09-01 |
| NA | NA | NA | NA | NA |
If an imputed date variable without a corresponding datetime variable is required, it can be derived by the derive_vars_dt() function.
ae <- tribble(
~AESTDTC,
"2019-08-09T12:34:56",
"2019-04-12",
"2010-09",
NA_character_
) %>%
derive_vars_dt(
dtc = AESTDTC,
new_vars_prefix = "AST",
highest_imputation = "M",
date_imputation = "first"
)| AESTDTC | ASTDT | ASTDTF |
|---|---|---|
| 2019-08-09T12:34:56 | 2019-08-09 | NA |
| 2019-04-12 | 2019-04-12 | NA |
| 2010-09 | 2010-09-01 | D |
| NA | NA | NA |
If the time should be imputed but not the date, the highest_imputation argument should be set to "h". This results in NA if the date is partial. As no date is imputed the date imputation flag is not created.
ae <- tribble(
~AESTDTC,
"2019-08-09T12:34:56",
"2019-04-12",
"2010-09",
NA_character_
) %>%
derive_vars_dtm(
dtc = AESTDTC,
new_vars_prefix = "AST",
highest_imputation = "h",
time_imputation = "first"
)| AESTDTC | ASTDTM | ASTTMF |
|---|---|---|
| 2019-08-09T12:34:56 | 2019-08-09 12:34:56 | NA |
| 2019-04-12 | 2019-04-12 00:00:00 | H |
| 2010-09 | NA | NA |
| NA | NA | NA |
Usually the adverse event start date is imputed as the earliest date of all possible dates when filling the missing parts. The result may be a date before treatment start date. This is not desirable because the adverse event would not be considered as treatment emergent and excluded from the adverse event summaries. This can be avoided by specifying the treatment start date variable (TRTSDTM) for the min_dates argument.
Please note that TRTSDTM is used as imputed date only if the non missing date and time parts of AESTDTC coincide with those of TRTSDTM. Therefore 2019-10 is not imputed as 2019-11-11 12:34:56. This ensures that collected information is not changed by the imputation.
ae <- tribble(
~AESTDTC, ~TRTSDTM,
"2019-08-09T12:34:56", ymd_hms("2019-11-11T12:34:56"),
"2019-10", ymd_hms("2019-11-11T12:34:56"),
"2019-11", ymd_hms("2019-11-11T12:34:56"),
"2019-12-04", ymd_hms("2019-11-11T12:34:56")
) %>%
derive_vars_dtm(
dtc = AESTDTC,
new_vars_prefix = "AST",
highest_imputation = "M",
date_imputation = "first",
time_imputation = "first",
min_dates = vars(TRTSDTM)
)| AESTDTC | TRTSDTM | ASTDTM | ASTDTF | ASTTMF |
|---|---|---|---|---|
| 2019-08-09T12:34:56 | 2019-11-11 12:34:56 | 2019-08-09 12:34:56 | NA | NA |
| 2019-10 | 2019-11-11 12:34:56 | 2019-10-01 00:00:00 | D | H |
| 2019-11 | 2019-11-11 12:34:56 | 2019-11-11 12:34:56 | D | H |
| 2019-12-04 | 2019-11-11 12:34:56 | 2019-12-04 00:00:00 | NA | H |
If a date is imputed as the latest date of all possible dates when filling the missing parts, it should not result in dates after data cut off or death. This can be achieved by specifying the dates for the max_dates argument.
Please note that non missing date parts are not changed. Thus 2019-12-04 is imputed as 2019-12-04 23:59:59 although it is after the data cut off date. It may make sense to replace it by the data cut off date but this is not part of the imputation. It should be done in a separate data cleaning or data cut off step.
ae <- tribble(
~AEENDTC, ~DTHDT, ~DCUTDT,
"2019-08-09T12:34:56", ymd("2019-11-11"), ymd("2019-12-02"),
"2019-11", ymd("2019-11-11"), ymd("2019-12-02"),
"2019-12", NA, ymd("2019-12-02"),
"2019-12-04", NA, ymd("2019-12-02")
) %>%
derive_vars_dtm(
dtc = AEENDTC,
new_vars_prefix = "AEN",
highest_imputation = "M",
date_imputation = "last",
time_imputation = "last",
max_dates = vars(DTHDT, DCUTDT)
)| AEENDTC | DTHDT | DCUTDT | AENDTM | AENDTF | AENTMF |
|---|---|---|---|---|---|
| 2019-08-09T12:34:56 | 2019-11-11 | 2019-12-02 | 2019-08-09 12:34:56 | NA | NA |
| 2019-11 | 2019-11-11 | 2019-12-02 | 2019-11-11 23:59:59 | D | H |
| 2019-12 | NA | 2019-12-02 | 2019-12-02 23:59:59 | D | H |
| 2019-12-04 | NA | 2019-12-02 | 2019-12-04 23:59:59 | NA | H |
If imputation is required without creating a new variable the convert_dtc_to_dt() function can be called to obtain a vector of imputed dates. It can be used for example in conditions:
mh <- tribble(
~MHSTDTC, ~TRTSDT,
"2019-04", ymd("2019-04-15"),
"2019-04-01", ymd("2019-04-15"),
"2019-05", ymd("2019-04-15"),
"2019-06-21", ymd("2019-04-15")
) %>%
filter(
convert_dtc_to_dt(
MHSTDTC,
highest_imputation = "M",
date_imputation = "first"
) < TRTSDT
)| MHSTDTC | TRTSDT |
|---|---|
| 2019-04 | 2019-04-15 |
| 2019-04-01 | 2019-04-15 |
Using different imputation rules depending on the observation can be done by using slice_derivation().
vs <- tribble(
~VSDTC, ~VSTPT,
"2019-08-09T12:34:56", NA,
"2019-10-12", "PRE-DOSE",
"2019-11-10", NA,
"2019-12-04", NA
) %>%
slice_derivation(
derivation = derive_vars_dtm,
args = params(
dtc = VSDTC,
new_vars_prefix = "A"
),
derivation_slice(
filter = VSTPT == "PRE-DOSE",
args = params(time_imputation = "first")
),
derivation_slice(
filter = TRUE,
args = params(time_imputation = "last")
)
)| VSDTC | VSTPT | ADTM | ATMF |
|---|---|---|---|
| 2019-08-09T12:34:56 | NA | 2019-08-09 12:34:56 | NA |
| 2019-11-10 | NA | 2019-11-10 23:59:59 | H |
| 2019-12-04 | NA | 2019-12-04 23:59:59 | H |
| 2019-10-12 | PRE-DOSE | 2019-10-12 00:00:00 | H |